Current location for King Malu

Saturday 18 July 2015

To Zygi... well not quite!


The original plan had been to start really early and sail to Zygi and back. Both Tim and I looked at the weather, and there was a possibility we could do it. The forecast said northerly then easterly changing to southerly around mid-day. I was slightly sceptical as only one of the forecasts said that the northerly and easterly would be anything other than a few knots of wind. But it was worth a try.

As it turned out, the winds were light. For the first few hours it was 2-4 knots so we motor sailed. It's an algorithm we call 'snudge' on the electric drive, where we give it a tiny kick and it really helps so with 8-10 amps on the electric drive we were sailing at 4 knots in 4 knots of wind. Not racing along but a gentle potter.

We tried the Asymmetric and that helped till we got to Cape Kiti and the wind dropped away to nothing so we zigzagged to try and find any wind and failed so just motored for a little hoping it could come up.

It did, but not with the quantity or direction we wanted, so we just headed out and put up the asymmetric and the mizzen stay sail.

We've not had these light wind sails up for quite a while. 120 degrees wind and we're heading in the wrong direction but sailing. Light winds still so we head for home.
We were shocked arriving at the Zenobia site. Normally there is one small buoy and a load of junk for dive vessels. By junk I mean empty containers tied onto ropes tied to the wreck which the dive boats moor on. You can see it in the right hand side of the photo.

However, today approaching from the south there was a south marker buoy! It hadn't been there when we left at 7AM.
There is a full set of north/south/east/west buoys. But beware there are no lights or bells on them, and they are not (yet) on any charts so sailing into Larnaca bay be careful at night.

Saturday 11 July 2015

First sail of the season

First sail of the season... Dry dock and travelling took its toil! But now she's ready for regular sailing. 

Monday 6 July 2015

BBQ

A year or so ago Tim bought a barbeque for King Malu, but we had not so far fitted it. On the last lot of CAD laser cutting and folding we got done I got round to (sorry) making the plate for it to  sit on.

The plate has four lugs to stop it falling off and a spigot on the bottom (welded using our new welding machine) which goes into a piece of stainless steel tube which is lashed to the stern of the boat.




Two days later we tried it out. Worked very well indeed.

Thursday 2 July 2015

Back in the water


Yes, King Malu is back in the water! You can see the new swimming platform on the stern. We're in a new berth now. Not a floating pontoon, but right by the slipway which means that it cannot break in the same way and it's more sheltered.